![]() Set on the positive side if main subjects tend to be underexposed and on the negative side if they tend to be overexposed. Standard flash exposure can be adjusted in a range of ☑ stop, in 1/8-stop increments. To access the adjustment screen, select, then press the button. Effective if main subjects in autoflash shooting without flash exposure compensation usually seem underexposed or overexposed. You can fine-tune the standard flash exposure level. Note that performing this adjustment may prevent you from obtaining suitable flash exposure. Perform this adjustment only if necessary. Normally, this adjustment is not required.If exposure cannot be maintained by adjusting ISO speed, shutter speed (Tv value) is automatically adjusted. With, the ISO speed is automatically adjusted within the ISO speed range. This function prevents the corresponding underexposure by adjusting ISO speed or shutter speed (Tv value) automatically to maintain the same exposure as before (1), (2), or (3). ![]() The maximum aperture value may decrease (the lowest f/number may increase) in mode (manual exposure shooting) with ISO speed set manually (except when set to ISO Auto) if you (1) Change lenses, (2) Attach an extender, or (3) Use a zoom lens with a variable maximum aperture value. Safety shift will take effect as necessary even when flash is used.However, if the manually set ISO speed exceeds the, the safety shift will take effect up or down to the manually set ISO speed. The minimum and maximum limits for the safety shift with the ISO speed are determined by ( ).Safety shift overrides any changes to or from default settings in if standard exposure cannot be obtained. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |